If there’s a hallway, bathroom, or kitchen in your home that doesn’t get enough daylight, this modern skylight might be the solution you’ve been looking for. A Solatube tubular skylight can transform the space in a single visit, without reframing the ceiling or cutting a large opening in your roof. In just a few hours, a formerly dark space will be filled with natural daylight. Every installation is completed by our roofing crews in partnership with our sister company, The Solar Guys, Central Florida’s Solatube Premier Dealer.
A tubular skylight is a sealed daylighting system made of three parts: a dome on the roof, a highly reflective tube that runs through the attic, and a fixture at the ceiling. It needs only a small opening between the rafters, so there is no light shaft to build, no drywall to finish, and no painting or patching needed. That makes it practical for rooms a traditional skylight cannot reach, including interior hallways, closets, and windowless bathrooms. Plus, there is far less heat gain since your ceiling and insulation stay mostly intact.
The rooftop dome’s rounded shape enables it to collect sunlight throughout the day, including the low angle light of early morning and late afternoon that a flat skylight misses. Solatube’s RayBender 3000 and LightTracker technology redirect that daylight down into Spectralight Infinity tubing, which reflects 99.7% of the light it carries and can route around attic obstacles with very little loss. At the ceiling, the fixture spreads the daylight evenly through the room.
The dome blocks essentially all UVB and UVC rays and about 98.5 percent of UVA, so floors and furniture are protected from fading. The tubing also sheds much of the sun’s heat on the way down, so the room gets brighter without warming up the way it can under a glass skylight.
A tubular skylight is a roof penetration, and how well it is sealed matters as much as the product itself. Our crews install roofs across Central Florida every day, so they know how to place the dome away from valleys and other spots where water collects, how to integrate the flashing with your shingles or tile, and how to leave the surrounding roof watertight. As a GAF Master Elite and President’s Club contractor and a FORTIFIED certified roofer, we bring the same standards to a skylight installation that we bring to a full roof replacement. Our partnership with The Solar Guys means every system is specified, sized, and supported by a Solatube Premier Dealer.
Designed for rooms of about 150 to 200 square feet, with tube runs up to 20 feet. It is the usual choice for bathrooms, laundry rooms, closets, hallways, and dens.
Designed for rooms of about 250 to 300 square feet, with tube runs up to 30 feet. It suits kitchens, family rooms, primary bathrooms, and larger entryways, and the longer reach helps when the best spot on the roof is not directly above the ceiling location you want.
The largest tubular skylight in the lineup, built for great rooms, open kitchens, and rooms with high or vaulted ceilings. It is ordered to fit your specific roof and ceiling, so the details are confirmed with you before installation.
The Solatube Brighten Up Series includes two fixture families. ThinLine fixtures sit nearly flush with the ceiling for a clean, understated look, while Contour fixtures add depth and shape when you want the fixture to stand out. The series also introduces ComfortSeal Technology, a four point ceiling seal that reduces hot and cold air exchange at the ceiling, with optional stackable ThermoLens layers for added thermal performance.
The standard fixture, and a good fit for almost any room. It spreads daylight into a soft, even glow and blends into the ceiling, whether it is in a hallway, a kitchen, or a bedroom.
A dimensional fixture with cascading contours that create a soft halo of light around the fixture. It works well in entries, main living areas, and larger kitchens where the ceiling is part of the design.
A sculptural fixture that pairs Fresnel optics with a frosted layer, casting daylight high onto the walls while gently lighting the ceiling. It is a strong option for rooms with taller ceilings.
Contour JustFrost Square, ThinLine OptiView Square, and ThinLine SoftView Square are available by special order for ceilings that already have square recessed lights or vents. Because they are not stocked on installation vehicles, the choice is confirmed with you ahead of install day.
Each system can be tailored to how the room is used:

LED light kit for electric light after dark in bedrooms, closets, hallways, and bathrooms

Daylight Dimmer for wall switch control over how much daylight enters the room

Ventilation kit that combines daylight and an exhaust fan in one ceiling fixture for bathrooms and laundry rooms

Shock Inner Dome for extra impact resistance, required in High Velocity Hurricane Zones

Solar powered NightLight that charges during the day and gives off a soft glow at night
Solatube flashings are formed from a single piece of seamless metal, which removes the joints where water typically gets in, and they are made for shingle, tile, flat tile, metal, shake, slate, and flat roofs. Solatube systems are approved under the Florida Building Code and certified for High Velocity Hurricane Zones. Because our crews are roofers first, they install each flashing to work with your specific roof covering. If you are already planning a roof replacement with us, ask about adding a Solatube at the same time so the flashing goes in with your new roof.
A traditional skylight gathers light mostly from directly overhead and needs a framed shaft between the roof and ceiling. A Solatube collects light across a wider range of sun angles, fits through a much smaller opening, and controls heat and UV far better than an open pane of glass. Traditional skylights still make sense when you want a view of the sky or fresh air in a room with a vaulted ceiling, and we install VELUX skylights for those projects.
Most installations are completed in a few hours. Our crew chooses the roof location that captures the most daylight, makes a small opening, seals it with the flashing, runs the tubing through the attic to the ceiling, and finishes with the fixture you selected. You end the day with a brighter room and a roof that is sealed the way a roofer would want it.
If you already have a tubular skylight that is leaking, cloudy, or not as bright as it used to be, our skylight repair team can inspect the dome, flashing, and tubing and recommend the right fix.
Ready to brighten a dark room? Call The Roof Guys at 352.553.2798 to schedule an in home assessment with our roofing team.
Sign up to receive special offers instantly and gain access to future The Roof Guys’ promotions.
We use cookies to improve your browsing experience, measure visits, and understand advertising performance. You can manage your preferences in detail.